Planned is also not recommended for your purchase reference if the requested feature is the main consideration. Planned***: Kindly note that Planned is NOT a guarantee, as the plan can be adjusted or changed. Be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding!ģ. Models that will support WireGuard VPN via firmware update ( Planned/Beta firmware): Router Modelġ. You will need to perform a firmware upgrade on your router later when the official firmware is released.Ģ. This post will be actively updated to notify the new models that add the support for WireGuard VPN feature, welcome to subscribe! We are excited to announce here that we do have some router models that support or plan to support WireGuard VPN feature, and there will be more in the near future. WireGuard VPN could be one of the most popular VPNs that we are seeing in the public community and forums. Get to know more details of each function and configuration please go to Download Center to download the manual of your product.VPNs have grown a great deal over the past few years, and as a result, we have seen an increase in demand for alternative VPN options on TP-Link routers. Alternatively, any Wi-Fi device can now access the Internet through your TP-Link N router by using the SSID and Password set up in the above steps. All other LAN ports on your TP-Link N router will now grant devices Internet access. Use an Ethernet cable to connect the main router to your TP-Link N router through their LAN ports (any LAN ports may be used). Go to System Tools - > Reboot and select Reboot to reboot the device.ħ. Go to DHCP - > DHCP Settings and select Disable the DHCP Server. Note: If using a dual band router, repeat this process for the 5GHz band as well.ĥ. WPA/WPA2-Personal is recommended as the most secure option. Go to Wireless -> Wireless Security and configure the wireless security. Go to Wireless -> Wireless Settings and configure the SSID (Network name). Note: After changing the LAN IP address, a reboot will be required and you will need to log into the TP-Link N router with the new IP address.ģ. This IP address should be outside the main router’s DHCP range.Įxample: If your DHCP is 192.168.2.100 -192.168.2.199 then you can set the IP to 192.168.2.11 Go to Network -> LAN on the side menu and change the LAN IP address of your TP-Link N router to an IP address on the same segment of the main router. ![]() Log into the router’s web management page.Ģ. ![]() Enjoy! Connect to the wireless network by using the SSID (wireless name) and password of the router.ġ. Note: If you want to change the default SSID (network name) and the password, please follow Quick Setup to complete the configuration.Ħ. How to change to Access Point mode: Go to ( Advanced)-> Operation Mode or Advanced-> System Tools-> Operation Mode. After successfully login, select Access Point mode and follow the Quick Setup to complete the configuration. Go to Tools menu > Internet Options > Connections > LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it.ĥ. Note: If the above screen does not pop up when you use IE Web-browser, it means that your IE Web-browser has been set to a proxy. Use admin for password, and then click Login. Enter in the address bar of a web browser. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID (network name) and password printed on the bottom label of the router.Ĥ. Connect the router to your wired host router’s Ethernet port via an Ethernet cable as shown below.ģ. Connect the power adapter to the router and turn on the router.Ģ.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |